ข้ามสารบัญไปยังเนื้อหา
อัปเดต 2026-09-07
Design alerts
standards limit checks
Check solved velocities, pressures, and other quantities against configurable, standards-based limits, and get flagged where the design breaches them.
เมื่อไรจึงใช้
- Enforcing a house/project standard (e.g. max liquid velocity, min pressure) across a whole model at once.
- A design-review sweep before issuing a model.
ค่าที่ต้องกรอก
| ค่า | คำอธิบาย |
|---|---|
| Limit set | Velocity / pressure / other bounds — from a standard preset or your own values. |
| Standard | Optional named basis for the limits (with a reference). |
คำนวณอย่างไร
After a solve, each element is compared against the active limit set and flagged pass/warn/fail. This is a design-review layer over your chosen limits — distinct from, and complementary to, the solver’s own correct-or-loud honesty notes (which flag out-of-envelope physics, not house rules).
ข้อควรระวัง
noteDesign alerts check YOUR limits; they do not replace the engine honesty banners, which flag when a result is outside the solver’s validated envelope.
ที่เกี่ยวข้อง