EGAT thermal-equipment datasheets

Datasheets for the pilot's heat-transfer equipment — an API 661 air-cooled gas cooler (E-201) and electric heat-tracing on the reactor (re-characterized from an earlier "band heater" concept) — each with its own vendor-ready calculation.

• Sizing an air-cooled heat exchanger against API 661 approach-temperature feasibility, not just a generic LMTD calc
• Specifying reactor temperature-maintenance via heating tape/cable rather than a clamp-on band heater
• Seeing how a design concept (band heater) gets corrected consistently across every reference once the real equipment type is known

The air-cooled HX calculator checks API 661 approach feasibility alongside the sizing math; the heat-tracing calculator models heating-tape/cable duty per the corrected equipment concept, updated across spec defaults, page UI, and the design report.